莉诚科技

Licheng Technology

网站首页 ※ 国际品牌（International Brand） ※ MPS / 美国芯源 ※ MP2662GC-0000-Z
您所在的位置：
  • MP2662GC-0000-Z

  • MP2662GC-0000-Z

    Features & Benefits

    • Fully Autonomous Charger for Single-Cell Li‑Ion/Polymer Batteries

    • 21V Maximum Input Voltage Rating with Over-Voltage Protection (OVP)

    • ±0.5% Charging Voltage Accuracy

    • I2C Interface for Setting Charging Parameters and Status Reporting

    • Fully Integrated Power Switches and No External Blocking Diode Required

    • Built-In Robust Charging Protection Including Battery Temperature Monitoring and Programmable Timer

    • PCB Over-Temperature Protection (PCB_OTP)

    • System Reset Function

    • Built-In Battery Disconnection Function for Shipping Mode

    • Thermal Limiting Regulation On-Chip

    • Available in a WLCSP-9 (1.75mmx1.75mm) Package

    • Safety-Related Certification:

      • IEC 62368-1 CB Certification


    • 0.00
      0.00
商品描述

Features & Benefits

  • Fully Autonomous Charger for Single-Cell Li‑Ion/Polymer Batteries

  • 21V Maximum Input Voltage Rating with Over-Voltage Protection (OVP)

  • ±0.5% Charging Voltage Accuracy

  • I2C Interface for Setting Charging Parameters and Status Reporting

  • Fully Integrated Power Switches and No External Blocking Diode Required

  • Built-In Robust Charging Protection Including Battery Temperature Monitoring and Programmable Timer

  • PCB Over-Temperature Protection (PCB_OTP)

  • System Reset Function

  • Built-In Battery Disconnection Function for Shipping Mode

  • Thermal Limiting Regulation On-Chip

  • Available in a WLCSP-9 (1.75mmx1.75mm) Package

  • Safety-Related Certification:

    • IEC 62368-1 CB Certification


The MP2662 is a highly integrated, single-cell, Li-ion/Li-polymer battery charger with system power path management for space-limited portable applications. The MP2662 takes input power from either an AC adapter or a USB port to supply the system load and charge the battery simultaneously. The charger function features pre-charge (PRE.C), constant current fast charge(CC) and constant voltage (CV) regulation, charge termination, and auto-recharge.

The power path management function ensures continuous power to the system by automatically selecting the input, battery, or both to power the system. This function features a low dropout regulator from the input to the system and a 100mΩ switch from the battery to the system. Power path management separates the charging current from the system load, which allows for proper charge termination and keeps the battery in full-charge mode.

The MP2662 provides a system short-circuit protection (SCP) function by limiting the current from the input to the system and the battery to the system. This feature is especially critical for preventing the Li-ion battery from being damaged due to an excessively high current. An on-chip battery under-voltage lockout (UVLO) cuts off the path between the battery and the system if the battery voltage drops below a programmable battery UVLO threshold. This prevents the Li-ion battery from being over-discharged. An integrated I2C control interface allows the MP2662 to program the charging parameters, such as input current limit, input minimum voltage regulation, charging current, battery regulation voltage, safety timer, and battery UVLO.

The MP2662 is available in a 9-pin WLCSP (1.75mmx1.75mm) package.